Essem Group

Garlock - Your partner for high performance sealing technology.

Experiance, performance & reliability !!
Hydrolic & Pneumatic Seals
Garloc Hydraulic & pneumatic seals solve many sealing problems in the area of mechanical engineering, in the steel industry, in the mobile hydraulic and many as well as many other areas.
Mechanical Seal
	Single Balance Mechanical seal No External flush or quench. Reduce maintainance cost Simple, sturdy, proven design Environmentally friendly	Typical Application Bauxite/alumina Fertilizers/ Phosphoric acid Calcium Carbonate Cellulose(Green,liquor) Copper, gold, lead, nickel Coal / fly ash Desulphurization(FGD)
CEFIL'AIR Inflatable seals
CEFIL'AIR pneumatic seals are fitted in the following cases where sealing, handling or locking is required. Movable copperdom bulkheads Storage containers Transport containers Leaklight panels(naval, aerospecial industry) Nuclear vessels(Equipment or personal chembers) Isothermal chembers Clean rooms Sliding or quick locking doors(autoclaves,sterilizers) Centrifugal filters(access doors and drainage hoppers) Aircraft access doors Cockpit canopies Potholes Cofferdams Pneumatic conveyors Phonic isolation
HELICOFLEX resilient metal seal
The Helicoflex seal was developed in close co-operation with the french nuclear enargy board and has been subjected to long and intensive trials. It is a flexible O-ring made of metal which is highly resilient.	Characteristics of the HELICOFLEX seal are almost comparable to rubber seal whereby the typical properties of the metal seal are maintained. HELICOFLEX seals are preferably employed in the case of static axial sealing in connection with flanged joints.
Oil Seal
Seals in the thermo-elastic high performance PS-SEAL series operate with a sealing lip made from modified PTFE. This material is produced using a method specially developed by Garlock and marketed under the brand name GYLON. Sealing lips made from GYLON have a perticularly effective memory characteristic, are highly elastic and flexible, cause very low friction, thanks to their non-stick-slip motion, suffer little wear and tear, and need no metallic spring element.	Application Centrifuge machinary Seperators Rotating air compressor Mixers Agitators Spiral conveyors Rotary lead-throughs pumps
VALVES - Sterile seal
Construction The media in the inner chember is protected against contamination by the surrounding blocking chambers. These chambers are directly connected to the inner sealing system and a second outer sealing system seperates them from the atmosphere. STERILE-SEAL valves are completely free of gaps and cavities to prevent any built-up of nutrient.		The safe concept STERILE-SEAL valves meet the high standard of Garlock's excellence. Body Split-body, manufactured from ductile iron, cast steel or stainless steel Safety sealing Between the two body halves, seals are fitted within the body liner to prevent atmospheric contamination as well as the escape media.
VALVES - GAR-SEAL
Corrosive and abrasive media Serive life safety under severe operating operations are important arguments for Garlock valves worldwide. High quality valves have a good return on investment. The econimical advantages with reduced maintenance, troublefree operation and superior service life are convincing		garlock valves define standards. The antistatic liner SAFETY-SEAL, valves for transport industry - some examples for successful Garlock value and the applications.
Besides these Garlock also has Compression packings, range of fibre based gaskets. Please write to us if you have any more queries.