Essem Group

Armour Steel
The product range Our experience is based on a huge number of boats representing more than 50 00 MT of these specific plates. OUR SOLUTION : MARS ® steel family for your protection. All products can be supplied in plates, cut parts, perforated plates	Steels for Targets Control and evaluation of ammunitions The power of the specialist to service your requirements An exceptional range of targets (from 3 to 600 mm thick) The quality and the metallurgical strengths: reproductibility, homogeneity, compactness OUR SOLUTION : MARS ® steel for target
Clad Plates
Thickness range: from 6 mm to 150 mm Clad plates are available in sizes up to 3200 mm wide and 14000 mm long – Unit plate-weights up to 20 tons. Hundreds of material combinations can be tailor made to your requirements
Base Materials : C – Mn steels Cr – Mo steels ustenitics Quenched and tempered steels	Alloy Cladding Materials: Ferritic-martensitic (405, 410 S …) (304L, 316L …) High molybdenum grades (904L, N08926 …) Duplexes (S32304, S32205, S32750) Nickel base (N08825, 06625, N10276, N06022)
Ingots
STEEL MADE TO MESURE CREUSOT METAL, subsidiary company of INDUSTEEL, produces and sells ingots and slabs destined for special steel plate production, casting and forging. A wide range of steel grades from 100 % iron content to high alloyed steel grades (such as stainless steel, nickel based etc.). A wide range of ingots adapted to the customers specific requirements.
Traditional ingots (round, polygonal, corrigated and square) From 5 to 190 tonnes Hollow ingots From 30 to 190 tonnes Slab under pressure From 30 to 70 tonnes Vacuum cast ingots From 76 to 190 tonnes Casting moulds From 15 to 250 tonnes
Mould and tool steels
Mould steels - the product range Prehardened 300 HB (110 kg/mm²) AISI P20 -W1.2311- W1.2312- W1.2738 SUPERPLAST® 300(P) Width < 2500 mm - Thickness < 1100 mm Prehardened 400 HB 55 NCDV7 (+S) - W1.2714 (+S) Width < 2000 mm - Thickness < 400 mm Corrosion resistant grades AISI 420 (+S) - W1.2316 - W1.2316+S - W1.2083 (+S) Width < 2000 mm - Thickness < 300 mm	Tool steels - the product range Cold work W1.2842 W1.2510 - AISI O1 W1.2363 - AISI A2 W1.2379 - AISI D2 TENASTEEL® Width < 2000 mm - Thickness < 150 mm Hot work (110 kg/mm²) W1.2343 - AISI H11 W1.2344 - AISI H13 W1.2767 Width < 2000 mm - Thickness < 300 mm
Pressure Vessel Steel
The largest dimensional range in the world… In plates In shells Formed plates (1/2 shells or complete shells). Forgings up to 130 t (through CFI). In heads One piece heads Multi-segment heads Specially adapted to meet the needs of each market Reduce costs during fabrication and service (life cycle costs) Improve reliability of critical equipment
Stainless Steel
Thickness range: standard grades from 5 to 300 mm thick and special grades up to 200 mm thick (duplex, heat resistant alloys, super-austenitic, ...).
Structured Steel
Thickness range : 4 mm to 150 mm. Your requirements: High yield strength Weight savings Easy welding Our solutions, including SUPERELSO® trademark : * SUPRALSIM 500 * 500 MPa strength * SUPRALSIM 690 * 690 MPa strength * SUPERELSO® 890 * 890 MPa strength * SUPERELSO® 960 * 960 MPa strength
Wear Resistant Steel
water quenched steels FORA SERIE CREUSABRO® TRADEMARK FORA 360 FORA 400 FORA 450 FORA 500	work hardening steels CREUSABRO® 4000 CREUSABRO® 4800 CREUSABRO® 8000 CREUSABRO® M (12% Mn "HADFIELD")
[Industeel] \| [Ascometal] \| [Marichal Ketin]